Download Print this page

DirecTV LH27 User Manual page 25

Advertisement

HD RECEIVER
RIGHT SIDE PANEL & CONNECTIONS
1. RESET BUTTON: The red reset button is located on the right side of the panel.
2. The access card slot, RESET button, receiver ID and model number are located behind the
door panel. Some receivers have the RESET button on the side panel, with no door, and the
receiver ID on a sticker underneath the unit.
RESET YOUR RECEIVER
Many problems can be corrected by performing a simple reset of the DIRECTV Receiver. If you experience frozen audio or video,
a blank screen, or the receiver won't respond to front panel button or remote control, you can reset your receiver with the
following steps:
- Press the red RESET button. Depending on your model of receiver, this will be either behind the access door on your
receiver's front panel, or on the right side. After pressing the RESET button, you'll need to wait a few minutes for program
guide information to be acquired.
- If the problems persist, try unplugging the power cord of the DIRECTV Receiver for 15 seconds, then plug it in again.
48
LH27_English.indd 48-49
CONNECTIONS TO AUXILIARY EQUIPMENT
The following definitions apply if you are updating your TV set, adding Surround sound or a DVD or VCR to the equipment already
installed by a professional.
VIDEO CONNECTIONS
Model LH27
HDMI: Use one HDMI cable (high definition multmedia interface) per receiver to provide HD video and the best digital audio signals
to your TV. (HDMI included with receiver)
RCA : The Yellow RCA connector provides SD video output to older TVs or to a DVD or VCR. (Not included with receiver)
AUDIO CONNECTIONS
Audio output is combined with the video output of the HDMI connector. If older TVs or additional equipment require audio signals you
can use these outputs:
HDMI: Use one HDMI cable (high definition multmedia interface) per receiver to provide HD video and the best digital audio signals
to your TV. (HDMI included with receiver)
Digital Coax: This connector provides digital audio output and may be used to feed digital audio to a surround system or DVD.
(Not included with receiver)
RCA: The red and white connectors provide analog audio output to older TV sets or to a DVD or VCR. (Not included with receiver)
EQUIPMENT DESCRIPTION
Video Format: 4:3 y 16:9
Resolution: Up to 480 lines in SD and up to 1080 in HD
Dimensions (Height x Width x Depth): 35mm x 220mm x 146mm
Power supply: 120-240v / 50-60Hz
Power force: 25w (max)
Power temperature: +0ºC a +50ºC
HD RECEIVER
49
12/3/13 4:33 PM

Advertisement

loading