Advertisement
HD RECEIVER
FRONT PANEL
1. REMOTE SENSOR: The infrared sensor picks up commands from the remote control. You cannot have any opaque object
between the remote and this sensor or else the command will not get through.
2. POWER: Turns your DIRECTV Receiver on or off. Your receiver still tunes and receives messages when powered off.
The power light flashes when you press a key on the remote to let you know it has received the command.
3. ARROWS: Move the onscreen highlight up, down, left or right.
ABOVE IMAGE IS FOR REFERENCE ONLY. YOUR RECEIVER MODEL MAY LOOK DIFFERENT.
2
46
LH27_English.indd 46-47
1
3
Model LH27
BACK PANEL
1. SATELLITE IN (SWM-1): Connect one line from your satellite dish here.
2. RCA-Audio/Video Jacks: A Standard-Definition (SD) output. You can use the entire row of RCA connectors
(yellow, white and red) to feed a VCR or DVD player/burner.
3. DIGITAL AUDIO OUT: Use this digital audio connection for sound. Not available on all models.
4. HDMI: Use this combination digital video and audio connector for the best HD picture quality.
5. USB: Used to connect USB devices for external recordings.
The use of the USB port depends on the services that DIRECTV offers in certain markets.
For more information visit www.directvla.com.
6. DC IN: Your receiver must be plugged in at all times to work properly. The green light indicates the receiver is powered.
1
HD RECEIVER
2
3
4
5
6
Model LH27
47
12/3/13 4:33 PM
Advertisement
