Schaffert FURROW V CLOSER Mounting Instructions

SCHAFFERT MFG. CO., INC.
FURROW V CLOSER MOUNTING INSTRUCTIONS
Before working on your planter or drill
Before working on your planter or drill
DANGER: when storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the
DANGER: when storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the
FFERT MFG. CO. INC. - phone: 800-382-2607 - fax: 308-364-2410
attachments. Do not allow planter to rest on poly FVC discs as they can warp
attachments. Do not allow planter to rest on poly FVC discs as they can warp
Before working on your planter or drill
Mounting Instructions
When storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the attachments.
DANGER:
Mounting Instructions
Read instructions completely and verify all package contents before beginning installation
PLEASE:
Before you begin, verify the "package contents" to ensure all items are included. FURROW V CLOSER MOUNTING INSTRUCTIONS
Before you begin, verify the "package contents" to ensure all items are included.
Step #1: Mount the FVC bracket to the planter unit using two 3/8" x 1-1/2" nuts and bolts (fig. (a)).
Step #1: Mount the FVC bracket to the planter unit using two 3/8" x 1-1/2" nuts and bolts (fig. (a)).
Step #2: assemble the disc to shaft with two 3/4" jam nuts so the disc is approxi-
Step #2: assemble the disc to shaft with two 3/4" jam nuts so the disc is approxi-
mately 1-3/4" from the shaft. The bearing needs to be toward the outside
working on your planter or drill
(fig. (b)).
: when storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the
nts. Do not allow planter to rest on poly FVC discs as they can warp
Step #3: position the shaft into the mounting bracket so that there is approximately 1"
Step #3: position the shaft into the mounting bracket so that there is approximately 1"
ting Instructions
pitch out on the front of the disc (fig. (c)). Set the disc (with the planter in the
you begin, verify the "package contents" to ensure all items are included. soil) to a depth of 1/2" (3/4" max.) (fig. (d)). Tighten the set screws making
O. INC. - phone: 800-382-2607 - fax: 308-364-2410
minor adjustments to the Furrow V Closer while in the field. This will depend
#1: Mount the FVC bracket to the planter unit using two 3/8" x 1-1/2" nuts and bolts (fig. (a)).
on the planting depth, speed
and conditions. Re-check
#2: assemble the disc to shaft with two 3/4" jam nuts so the disc is approxi-
mately 1-3/4" from the shaft. The bearing needs to be toward the outside and tighten all nuts, bolts,
FURROW V CLOSER MOUNTING INSTRUCTIONS
(fig. (b)).
and set screws.
A/C 78-79 Air Planters
#3: position the shaft into the mounting bracket so that there is approximately 1"
(Read Instructions Completely before Beginning Installation)
pitch out on the front of the disc (fig. (c)). Set the disc (with the planter in the
r or drill
soil) to a depth of 1/2" (3/4" max.) (fig. (d)). Tighten the set screws making
the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the
minor adjustments to the Furrow V Closer while in the field. This will depend
est on poly FVC discs as they can warp
on the planting depth, speed
and conditions. Re-check
and tighten all nuts, bolts,
ackage contents" to ensure all items are included.
and set screws.
ket to the planter unit using two 3/8" x 1-1/2" nuts and bolts (fig. (a)).
o shaft with two 3/4" jam nuts so the disc is approxi-
the shaft. The bearing needs to be toward the outside
to the mounting bracket so that there is approximately 1"
nt of the disc (fig. (c)). Set the disc (with the planter in the
/2" (3/4" max.) (fig. (d)). Tighten the set screws making
o the Furrow V Closer while in the field. This will depend
th, speed
check
bolts,
fig. (a)
mounting
bracket
7 1 4 9 5 r d . 3 9 7 @ i n d i a n o l a , n e 6 9 0 3 4 @ p h o n e : 8 0 0 - 3 8 2 - 2 6 0 7 @ f a x : 3 0 8 - 3 6 4 - 2 41 0 @
7 1 4 9 5 r d . 3 9 7 @ i n d i a n o l a , n e 6 9 0 3 4 @ p h o n e : 8 0 0 - 3 8 2 - 2 6 0 7 @ f a x : 3 0 8 - 3 6 4 - 2 41 0 @
71495 rd. 397 ∙ indianola, ne 69034 ∙ 308-364-2607 or 800-382-2607 ∙ fax: 308-364-2410 ∙ sales@schaffert.com ∙ www.schaffert.com ∙ 7 apr 2017
FURROW V CLOSER MOUNTING INSTRUCTIONS
FURROW V CLOSER MOUNTING INSTRUCTIONS
(Read Instructions Completely before Beginning Installation)
(Read Instructions Completely before Beginning Installation)
A/C 78-79 Air Planters
A/C 78-79 Air Planters
(Read Instructions Completely before Beginning Installation)
mately 1-3/4" from the shaft. The bearing needs to be toward the outside
(fig. (b)).
pitch out on the front of the disc (fig. (c)). Set the disc (with the planter in the
soil) to a depth of 1/2" (3/4" max.) (fig. (d)). Tighten the set screws making
minor adjustments to the Furrow V Closer while in the field. This will depend
on the planting depth, speed
and conditions. Re-check
and tighten all nuts, bolts,
and set screws.
Remove original press wheel and
replace with Furrow V Closer
mounting
bracket

HARDWARE KIT

fig. (a)
Item
mounting
3/8" x 1-1/2" bolts . . . . . . . . . . . . . . . 2
bracket
3/4 jam nuts . . . . . . . . . . . . . . . . . . . . 2
Instruction Sheet . . . . . . . . . . . . . . . . . 1

PARTS LIST

Item & Part #
*NOTE: some hardware is installed at the
factory.
Important Points To Remember:
- When setting the pitch of the Furrow V Closer;
lift the gauge wheel up so the FVC disc can
properly be pitched. Gauge wheel tire will
approximately
1-3/4" rest on FVC disc and will not hurt it.
fig. (b)
A/C 78-79 Air Planters
A/C 78-79 Air Planters
A/C 78-79 Air Planters

FVC Package Contents

HARDWARE KIT
Item
3/8" x 1-1/2" bolts . . . . . . . . . . . . . . . 2
3/4 jam nuts . . . . . . . . . . . . . . . . . . . . 2
Instruction Sheet . . . . . . . . . . . . . . . . . 1
fig. (a)
PARTS LIST
fig. (a)
mounting
Item & Part #
bracket
*NOTE: some hardware is installed at the
factory.
Important Points to Remember:
A/C 78-79 Air Planters
- When setting the pitch of the Furrow V Closer;
FVC Package Contents
lift the gauge wheel up so the FVC disc can
(per single row)
properly be pitched. Gauge wheel tire will
rest on FVC disc and will not hurt it.
Quantity
approximately
approximately
1-3/4"
1-3/4"
Quantity
fig. (b)
fig. (b)
fig. (c) pitch adjustment
fig. (c) pitch
308-364-2607
OR
A/C 78-79 Air Planters
A/C 78-79 Air Planters
FVC Package Contents
FVC Package Contents
(per single row)
(per single row)
HARDWARE KIT
HARDWARE KIT
Item
Item
3/8" x 1-1/2" bolts . . . . . . . . . . . . . . . 2
3/8" x 1-1/2" bolts . . . . . . . . . . . . . . . 2
3/4 jam nuts . . . . . . . . . . . . . . . . . . . . 2
3/4 jam nuts . . . . . . . . . . . . . . . . . . . . 2
Instruction Sheet . . . . . . . . . . . . . . . . . 1
Instruction Sheet . . . . . . . . . . . . . . . . . 1
PARTS LIST
PARTS LIST
Item & Part #
Item & Part #
*NOTE: some hardware is installed at the
*NOTE: some hardware is installed at the
factory.
factory.
(per single row)
Important Points to Remember:
Important Points to Remember:
Quantity
- When setting the pitch of the Furrow V Closer;
- When setting the pitch of the Furrow V Closer;
lift the gauge wheel up so the FVC disc can
lift the gauge wheel up so the FVC disc can
properly be pitched. Gauge wheel tire will
properly be pitched. Gauge wheel tire will
rest on FVC disc and will not hurt it.
rest on FVC disc and will not hurt it.
Quantity
fig. (c) pitch adjustment
fig. (c) pitch adjustment
fig. (c) pitch
fig. (d)
i n f o @ s c h a f f e r t . c o m @ w w w . s c h a f f e r t . c o m
i n f o @ s c h a f f e r t . c o m @ w w w . s c h a f f e r t . c o m
fig. (d)
800-382-2607
Quantity
Quantity
Quantity
Quantity
fig. (c) pitch
fig. (c) pitch
fig. (d)