0-382-2607 - fax: 308-364-2410
SCHAFFERT MFG. CO., INC.
REBOUNDER
NTING INSTRUCTIONS
Before working on your planter or drill
Air Planters
DANGER: when storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or
damage to the Rebounder. WARNING: do not roll back or back up the planter in or on the ground as this can result in damage to the
y before Beginning Installation)
Before working on your planter or drill
Rebounder.
When storing or working on the planter always install cylinder stops or place the planter on stands to prevent personal injury or damage to the attachments.
DANGER:
Read instructions completely and verify all package contents before beginning installation
PLEASE:
Mounting Instructions
der stops or place the planter on stands to prevent personal injury or
he planter in or on the ground as this can result in damage to the
Before you begin, verify all items listed in the "package contents" table.
NOTE:
If applying liquids in furrow with the Rebounder, attach either Y-Not Split It, Hose Holder,
Step #1:
take the seed boot extension off and remove the rubber flap, then re-
or Straight Shot kit by following kit directions.
attach the boot. Bolt the Rebounder bracket in place with the two bolts
INSTALL KIT BEFORE INSTALLING REBOUNDER TO PLANTER UNIT
(fig. (a)).
s" table.
STEP #1:
Step #2:
now attach the Rebounder with the bolt, fender washer and nut.
ber flap, then re-
Item
Take the seed boot extension off and remove
with the two bolts
Rebounder. . . . . . . . . . . . . . . . . . 1
the rubber flap, then re-attach the boot. Bolt the
Step #3:
set planter on a flat surface, the tail of the Rebounder should be about
5/16 x 1" bolt . . . . . . . . . . . . . . . 1
Rebounder bracket in place with the two bolts.
5/16" lock nut . . . . . . . . . . . . . . 1
3/8" off the floor or flat surface. Tighten the nut on the Rebounder.
her and nut.
STEP #2:
fender washer . . . . . . . . . . . . . . . 1
Optional fittings are available for fertilizer/chemical applications. Options
Instruction Sheet. . . . . . . . . . . . . 1
Attach the Rebounder with the bolt, fender
include: Y-Not Split-It, or Hose Holder each available for an additional charge.
er should be about
washer and nut.
he Rebounder.
STEP #3:
Item
ations. Options
Bracket . . . . . . . . . . . . . . . . . . . . 1
additional charge.
Set the planter on a flat surface. The tail of the
5/16" bolts . . . . . . . . . . . . . . . . . 2
Rebounder should be about 3/8" off the floor or
5/16" Nuts . . . . . . . . . . . . . . . . . 2
flat surface. Tighten the nut on the Rebounder.
bracket
er
A/C 78 & 79 Air Planter w/ Rebounder
and Furrow V Closer (see FVC mounting
instructions for this planter type)
71495 rd. 397 - indianola, ne 69034 - phone: 800-382-2607 - fax: 308-364-2410 - info@schaffert.com - www.schaffert.com - Sept 18, 2009
5; 5,918,557; 6,082,275; 6,283,050; 6,453,832, 6,763,773 and 7,121,216.
8-364-2410 - info@schaffert.com - www.schaffert.com - Sept 18, 2009
Rebounder covered by one or more of the following U.S. patents: 5,640,915; 5,918,557; 6,082,275; 6,283,050; 6,453,832; 6,763,773 and 7,121,216.
71495 rd. 397 ∙ indianola, ne 69034 ∙ 308-364-2607 or 800-382-2607 ∙ fax: 308-364-2410 ∙ sales@schaffert.com ∙ www.schaffert.com ∙ 6 apr 2017
REBOUNDER
Step #2:
(Read Instructions Completely before Beginning Installation)
®
Step #3:
A/C 78-79 Air Planters
Optional fittings are available for fertilizer/chemical applications. Options
include: Y-Not Split-It, or Hose Holder each available for an additional charge.
Rebounder Package Contents
(per single row)
Quantity
Bracket Package Contents
(per single row)
Quantity
bracket
bracket
REBOUNDER WITH FURROW V CLOSER
fig. (a)
A/C 78 & 79 Air Planter with
Rebounder & Furrow V Closer
71495 rd. 397 - indianola, ne 69034 - phone: 800-382-2607 - fax: 308-364-2410 - info@schaffert.com - www.schaffe
Rebounder
Slide
Rebounder all
the way up so
the bolt is at
the bottom of
the slot. The
bolt should be
at the bottom
of the slot on
Rebounder covered by one or more of the following U.S. patents: 5,640,915; 5,918,557; 6,082,275; 6,283,050; 6,453,832, 6,763,773 and 7,121,216.
the bracket as
well.
(fig. (a)).
MOUNTING INSTRUCTIONS
TM
now attach the Rebounder with the bolt, fender washer and nut.
A/C 78-79 Air Planters
MOUNTING INSTRUCTIONS
set planter on a flat surface, the tail of the Rebounder should be about
3/8" off the floor or flat surface. Tighten the nut on the Rebounder.
.
See kit instructions.
Rebounder
Rebounder covered by one or more of the following U.S. patents: 5,640,915; 5,918,557; 6,082,275; 6,283,050; 6,453,832, 6,763,773 and
fender washer
part of
planter
308-364-2607
OR
Rebounder Package Contents
(per single row)
Item
Rebounder. . . . . . . . . . . . . . . . . . 1
5/16 x 1" bolt . . . . . . . . . . . . . . . 1
5/16" lock nut . . . . . . . . . . . . . . 1
fender washer . . . . . . . . . . . . . . . 1
Instruction Sheet. . . . . . . . . . . . . 1
fig. (a)
Bracket Package Contents
(per single row)
Item
Bracket . . . . . . . . . . . . . . . . . . . . 1
5/16" bolts . . . . . . . . . . . . . . . . . 2
5/16" Nuts . . . . . . . . . . . . . . . . . 2
fender
washer
fender washer
Rebounder
A/C 78 & 79 Air Planter w/ Rebounder
and Furrow V Closer (see FVC mounting
instructions for this planter type)
bracket's
narrow
side up
5/16 x 1" bolt
5/16" lock nut
800-382-2607
fender washer
Instruction She
Bracket P
Item
Bracket . . . . .
5/16" bolts . .
5/16" Nuts . .
Quantity
Quantity
A/C 78 & 79 Air Planter w/
and Furrow V Closer (see FV
instructions for this plan
Furrow V
Closer
(per
Need help?
Do you have a question about the Rebounder and is the answer not in the manual?
Questions and answers