Advertisement
Quick Links
FORCE
FORCE BLOWER Owner's Manual
IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE
Part No 441502
6O2V & 602X BLOWER Owner's Manual
TM
F602V, F602X
ACCESSORIES
FRONT AIR DIRECTOR
Simple to attach, allowing air
to be directed forward.
PN# 441130
Original Instructions
HOSE KIT
Easily attached hose and
nozzle for hard to reach
places.
PN# 441166
1
441502_A_HI
Advertisement
Related Manuals for Billy Goat FORCE 602V
Summary of Contents for Billy Goat FORCE 602V
- Page 1 FORCE 6O2V & 602X BLOWER Owner’s Manual FORCE BLOWER Owner's Manual F602V, F602X ACCESSORIES FRONT AIR DIRECTOR HOSE KIT Simple to attach, allowing air Easily attached hose and to be directed forward. nozzle for hard to reach places. PN# 441130 PN# 441166 Original Instructions IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
FORCE 602V/X BLOWER Owner’s Manual CONTENTS SPECIFICATIONS, SAFETY, & INSTRUCTION LABELS PACKING CHECKLIST ASSEMBLY OPERATION AND MAINTENANCE TROUBLESHOOTING ILLUSTRATED PARTS LIST 9-10 Go to http://www.billygoat.com for French-Canadian translations of the product manuals. Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits. Part No 441502 441502_A_HI... -
Page 3: Specifications, Safety, & Instruction Labels
INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. For your convenience in ordering replacement labels, part numbers are included in the Illustrated Parts List. -
Page 4: Packing Checklist
These items should be included in your carton. If any of these parts are missing, contact your dealer. ® Your BILLY GOAT FORCE Blower was shipped in one carton, completely assembled except for the front wheel, upper handle assembly, and the Aim-N-Shoot cable. -
Page 5: Assembly
1. First, attach the front wheel. The hardware to secure the wheel (spacer, bolt, and nut) are included with your unit. Gently lower your Billy Goat Force Blower onto its back to access the front wheel bracket. Insert the spacer into the front wheel. Then, place the wheel into the front wheel bracket. -
Page 6: Operation And Maintenance
Fig. 4 OPERATION BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot control lever to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther. - Page 7 FORCE 602V/X BLOWER Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 100-150 Hours Inspect for worn or damaged parts Check for excessive vibration ...
-
Page 8: Troubleshooting
FORCE 602V/X BLOWER Owner’s Manual TROUBLESHOOTING Problem Possible Cause Solution Abnormal vibration Loose or out of balance impeller. Check impeller and replace if required. Debris in impeller. Clear debris with compressed air or a backpack blower (See Fig . 6 and 7 below).* Loose engine. -
Page 9: Illustrated Parts List
FORCE 602V/X BLOWER Owner’s Manual F601V and F601X PARTS DRAWING Part No 441502 441502_A_HI... - Page 10 FORCE 602V/X BLOWER Owner’s Manual F601V and F601X PARTS LIST F602V F602X ITEM NO. DESCRIPTION PART NUMBER QTY. PART NUMBER QTY. ENGINE, 160CC, VANGUARD 382351 ENGINE B&S XR 441210 BASE ENGINE WA 441151-S 441151-S SCREW PLASTITE #8-16 X 3/4" HWH 441155 441155 PLATE REINFORCE HOUSING...