Teltonika FMP100 Manual

Bluetooth settings

Hide thumbs Also See for FMP100:

https://wiki.teltonika-gps.com/view/FMP100_Bluetooth%C2%AE_settings

FMP100 Bluetooth® settings

Main Page

Fast & Easy Trackers

settings

Contents

1 Disclaimer

3.1 Bluetooth® solutions

Disclaimer

If you are not using Bluetooth®, please consider turning it off or change Bluetooth® PIN to

remove potential risks.

If you are using Bluetooth® we strongly recommend using AES encryption for enhanced security.

General functionality

General functionality configures Bluetooth® to work in slave mode. This mode allows any external

device to connect to FMP100.

Parameter BT Radio allows enabling or disabling Bluetooth®. There are three different settings:

Disabled

– Bluetooth® functionality will be disabled.

Enable (hidden)

connect to FMP100, but no devices will be able to detect it.

FMP100

FMP100 Manual

– Bluetooth® functionality will be enabled, external devices will be able to

FMP100 Configuration

> FMP100 Bluetooth®

Table of Contents

Do you have a question about the FMP100 and is the answer not in the manual?

Page 1 Parameter BT Radio allows enabling or disabling Bluetooth®. There are three different settings: Disabled – Bluetooth® functionality will be disabled. Enable (hidden) – Bluetooth® functionality will be enabled, external devices will be able to connect to FMP100, but no devices will be able to detect it.
Page 2 – PIN and Authorized Devices MAC List will be checked against to allow connection to FMP100. If the external device MAC ID is in the list and correct Local PIN is entered then connection will be established, otherwise FMP100 will reject connection.
Page 3 I/O element value is set to 0. FMP100 supports ONE connection at a time. FMP100 can see up to 10 available devices. If there are more than 10 devices, the list may change with each new scan.