Setting Security And Locking The Monitor Controls; Password Security - NEC MultiSync ME431 User Manual

Large format display
Hide thumbs Also See for MultiSync ME431:
Table of Contents

Advertisement

Setting Security and Locking the Monitor Controls

Under normal operation, the monitor can be controlled by any person using the remote control or the monitor control panel. You
can prevent unauthorized use and changes to the monitor settings by enabling the options for Security and Lock Settings.
The security and locking functions covered in this section are:
Setting the password
Enabling password security
Locking the remote control buttons
Locking the monitor control panel buttons

NOTEN:
The instructions in this section describe locking access to the monitor controls. Other security settings available for this
monitor are described in the related sections for those controls:
 •
"Network Settings" on page 56
Settings Location
The instructions in this section guide you through configuring security and locking functions in the monitor's OSD menu. These
settings can also be configured using the monitor's web controls. The function names and location in the web controls are the
same as the OSD menu. See
The menu options for Security and Lock Settings are in the [PROTECT] menu in both the OSD menu and web controls.
PROTECT:
POWER SAVE SETTINGS
THERMAL MANAGEMENT
SCREEN SAVER
POWER ON DELAY
SECURITY SETTINGS
LOCK SETTINGS
ALERT MAIL
RESET

Password Security

When password security is enabled a four-digit passcode is required when turning on the main power and/or accessing the
OSD (see
page
47). The monitor will function normally after the password is entered. If no buttons have been pressed for
30 seconds, the monitor will return to SECURE MODE automatically and the password will be required again.

NOTEN:
If you change the password make a note of the password in a secure location. If you forget your password, you will need
to contact technical support to get a recovery password to access the monitor OSD menu.
for the monitor's web controls.
page
55.
PASSWORD:
o o o o
SECURE MODE:
START-UP LOCK
CONTROL LOCK
CHANGE PASSWORD
CURRENT PASSWORD:
o o o o
NEW PASSWORD:
o o o o
CONFIRM PASSWORD:
o o o o
English−46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync me501Multisync me551Multisync me651

Table of Contents