NEC MultiSync ME431 User Manual page 83

PICTURE MENU
GAMMA
NATIVE
2.2
2.4
S GAMMA
DICOM SIM.
PROGRAMMABLE1, 2, 3
COLOR
COLOR
COLOR TEMPERATURE
COLOR CONTROL
CONTRAST
ADVANCED
HDR MODE
SHARPNESS
ASPECT
NORMAL
FULL
WIDE
1:1
ZOOM
ZOOM
HZOOM
VZOOM
H POS
V POS
ADAPTIVE CONTRAST*
Select a monitor gamma correction for best picture quality. Selection depends on the desired usage.
Gamma correction is handled by the LCD panel.
Typical monitor gamma for use with a computer.
Typical gamma settings for use with videos, such as DVDs and Blu-rays.
Special gamma for certain types of movies. Raises the light parts and lowers the dark parts of the image
(S-Curve).


NOTE: Do not use for diagnostic purposes.
DICOM GSDF curve simulated for LCD type.
A programmable gamma curve can be loaded using optional NEC software.
Adjusts the color saturation of the screen. Press + or – button to adjust.
Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen.
A high color temperature will make the screen bluish. If a temperature needs further adjustment, the
individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B levels, set [CUSTOM] as
[COLOR TEMP] selection.


NOTE: When [PROGRAMMABLE1], [PROGRAMMABLE2] or [PROGRAMMABLE3] is selected in
[GAMMA], this function cannot be changed.
Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta colors individually. For example, you
can change red to yellow or purple.
Adjusts the image brightness in relationship to the input signal. Press + or – button to adjust.
When the monitor detects an HDR signal, you can select preferred gamma correction from [LOW],
[MIDDLE] or [HIGH].
Adjusts the crispness of the image. Press + or – button to adjust.
Select the aspect ratio of the screen image.


NOTE: • If you change [H POSITION] and [V POSITION] settings with a reduced image, the image will
not be changed.

•
The [ASPECT] automatically changes to [FULL] when the [SCREEN SAVER] starts. When the
[SCREEN SAVER] stops, the [ASPECT] returns to its previous setting.

•
This function is not available when [MOTION] in [SCREEN SAVER] is active.

•
[ZOOM] is not available for an image with an input resolution of 4K.
Shows the aspect ratio as it is sent from the source.
Fills the entire screen.
Expands a 16:9 letterbox signal to fill the entire screen.
Shows the image in a 1 by 1 Pixel format. (If the input resolution is higher than the recommended
resolution, the image will be scaled down to fit the screen).
Expands/reduces the image.


NOTE: The areas of the expanded image that are outside of the active screen area are not shown.
The reduced image may have some image degradation.
Maintains the aspect ratio while zooming.
Horizontal zoom value.
Vertical zoom value.
Horizontal position.
Vertical position.
Sets the level of adjustment for dynamic contrast.
2
If [HIGH] is set, the image is shown clearly but it makes brightness unstable due to the wide gap in
contrast variation.
English−79