Service Mode; Setting To Service Mode; Resetting To User Mode; Function In Service Mode - Panasonic PT-RZ470 Series Service Manual

3. Service Mode

This model has Service Mode in addition to regular on screen menu (user mode).
This mode enables some menu settings for the service operation.

3. 1. Setting to Service Mode

1. Press menu button of main body or remote controller and go to "Projector setup" on Main menu.
Then go to sub menu and select "Service Password" and press ENTER button.
2. Input the password "1565" by remote controller and press the ENTER button.
The INPUT SELECT button will change to a number between 1-6.
3. Press the MENU button. "Service Mode" (Main Menu) will be displayed.

3. 2. Resetting to User Mode

1. Press menu button of main body or remote controller and go to Main menu -> "Projector setup".
Then go to sub menu and select "Service Password" and press ENTER.
2. Input the password "1" by remote controller and press the ENTER button.
The INPUT SELECT button will change to a number between 1-6.
3. Press the MENU button. "User Mode" (Main Menu) will be displayed.
3. 3. Function of Service Mode
3. 3. 1. EXT OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
1. EXTEND PROJECTOR ID
ON : PROJECTOR ID can be set to ALL and 1-64.
OFF : PROJECTOR ID can be set to ALL and 1-6.
The input number is displayed as *.
The input number is displayed as *.
1.
2.
3.
4.
5.
6.
INF - 7