Service Mode; Procedure To Enter The Service Mode; Canceling The Service Mode; Flicker Adjustment Mode - Panasonic PT-AE700U Service Manual

4 Service Mode

This mode is used to display seven kinds of test patterns [Horizontal lines, Vertical lines, Dots, Crosshatch, White cross, Black
cross and White (No pattern)] in the four colors (White, Red, Green and Blue).
Note:
· On the service mode, displays above patterns by each color without test equipment such as PC or SG. Use the service
mode for simplified adjustments by your eyes and so on.
4.1.

Procedure to enter the service mode

Select "SERVICE MODE" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
Note:
· In the service mode, pressing the up-arrow "
left-arrow " " or right-arrow "
4.2.

Canceling the service mode

Press "MENU" button on the main unit or remote control unit.

5 Flicker Adjustment Mode

If replacing the optical parts (LCD Panel / LCD block) or A-P.C.Board of this projector, enter the flicker adjustment mode and
minimize the flicker.
5.1.

Procedure to enter the adjustment mode

Select "FLICKER ADJ" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
Note:
"DESK setting (blue)" is displayed when entering the adjustment mode.
5.2.

Adjustment Display and Contents

· Setting value is increased and decreased with the right-arrow "
" ": Decrease, "
− − − − Adjust the setting value to minimize the flicker on the screen.
− − − − Execute the adjustment by 6 patterns below.
· The pattern (adjustment display) is switched with the up-arrow "
" ": Forward direction, "
− − − − There are 6 patterns of "DESK setting (blue)", "DESK setting (red)", "DESK setting (green)", "CEILING setting (blue)",
"CEILING setting (red)" and "CEILING setting (green)".
− − − − The setting value is saved into this projector when the pattern is switched.
5.3.

Canceling the flicker adjustment mode

Press "MENU" button on the main unit or remote control unit.
Note:
When "MENU" button is pressed, the setting value at that time is saved into this projector and the adjustment mode is canceled.
" button the color selection (White / Red / Green / Blue).
": Increase
": Reverse direction
" or down-arrow " " button allows the test pattern selection and the
" and left-arrow "
" and down-arrow "
9
PT-AE700U / PT-AE700E
" buttons.
" buttons.