SECTION 1 SERVICE INFORMATION
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
SERVICE PASSWORD
INPUT
SET
ENTER
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
SERVICE PASSWORD
INPUT
SET
ENTER
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
1. DYNAMIC GAMMA MODE
• Setting of the DYNAMIC GAMMA operation.
- ON : Enable the Dynamic gamma function. (Default setting)
- OFF : Disable the Dynamic gamma function.
EXTRA OPTOPN
1.
DYNAMIC GAMMA MODE
2.
3DCMS
3.
SELF CHECK
4.
POWER OFF MESSAGE
5.
ERROR OSD
6.
ELECTRICAL CONVERGENCE
7.
MECHANICAL CONVERGENCE
8.
MODEL
9.
CLOG SENSOR CALIBRATION
10.
LIGHT ADJUST
11.
INDICATOR SETTING
MENU SELECT
SUB MENU
ENTER
INF-13
SERVICE PASSWORD
SERVICE MODE
RETURN
MENU
SERVICE PASSWORD
USER MODE
RETURN
MENU
ON
ON
SHUTTER KEEP
OFF
<RZ31K/RS30K>