Case of a communication fault, it is displayed as "No response from the Projector".
●
In this case, select [ Option ] ⇒ [ Setting ] ⇒ [ PJ ].
Projector and computer is connected [Port No], [Baud Rate],
[Parity] please set correctly.
4. 1) Select to [Option] => [Setting] => [CL-200].
2) CL-200 and computer is connected [Port No], [Baud Rate], [Parity] please set.
3) [OK] button is clicked after a setup is completed.
①
②
③
ADJ - 9
①
②
③