2.10. Procedure for Assembling of LD unit and Heat-pipe unit
2.10.0. Preparation
Necessary tools and grease
No.
1
Philips screw driver (Normal ones)
Torque driver ( 60 cN・m ~ 80 cN・m)
2
Bits ( +bit No.1, + bit No.2 )
LD GREASE MASK PLATE
Part No. : TZSH07039
3
Spatula
4
Grease
・ Please make sure to use the grease below for
assembling LD unit and Heat-pipe.
Please purchase this grease locally.
[Information of grease]
5
Manufacturer : Shin-Etsu Chemical Co.,Ltd
Item : Thermal Interface compounds
(High reliability)
Model : G-776
Packing : 100g or 1kg
Item
DIS-15
Trmark
For painting the grease
Please contact
service department of VSBD
for the detail.