Software Update Procedure - Panasonic PT-RZ470 Series Service Manual

2. Software Update procedure

* LAN terminal connection, be able to update the Maine, Sub, Network microprocessor software.
* Serial terminal connection, be able to update Maine, Sub, DIGITAL LINK microprocessor software.
2. 1. Update by the LAN terminal connection
2. 1. 1. Equipment to be used
1. Computer : Use it for the transfer of backup Software.
2. Communication cable : LAN cable. (When is connected directly; crossing cable)
3. Service Software : [MainSubNet Update Tool.exe] Service software is downloaded from the projector service homepage.
4. Microprocessor Software: Please download the file from the projector service homepage to the PC.
2. 1. 2. Connection Preparations
1. Confirm the network IP address of the projector
and take a note.
2. Set the IP address of the computer to the
approximate value of the projector IP address.
3. Connect the LAN terminal of the projector to the PC
with a LAN cable.
* Set up a PC in advance, prevent be in the standby/ shut-down state.
* "DIGITAL LINK MODE" of the NETWORK menu on projector, set to [AUTO] or [ETHERNET].
2. 1. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software with a computer, select Model, and then click the [OK] button..
3. Select "LAN" in "Connection" and input the IP address of the projector, and click [Connection Check] button.
4. A result of the connection confirmation is displayed.
" Check : OK " → Click [OK] button and advance next.
" Check : NG " → Come back to item 3., and please
confirm whether setting is right.
(Main/Sub/Network)
Computer
LAN cable
(Straight)
ADJ - 13
Projector
LAN cable (Straight)
Hub