Advertisement
Available languages
Available languages
®
Push Button and LED Status Indicators - Sensor
-
Push/slide lock at end of sensor to unlock position
Locked
Unlocked
-
Slide rear cover off the expose the push button.
rear cover
-
LED indicator
Push button to determine
sensor status (see table).
push
button
Push
Action
Button
2 times
Retrieve network
status
3 times
Enters PIR detection
4 times
Force rejoin
5 times
Check battery health
LED
Description
Indicators
Joined
Not joined
PIR sensor will detect motion
and blink LED green at a
faster rate.
1. Occupancy timeout will be
reduced to 5 seconds between
detection.
2. PIR detection mode will
timeout in 20 minutes.
Occupancy detected.
LED blink 1 sec on, 1 sec off for
(1 sec)
duration of occupancy timeout.
Force a rejoin at a faster rate.
1. The sensor will continuously
try to join until joined.
2. Timeout after 60 sec
independent of rejoin success.
Joined
Not joined
Good
Low
N/A
Page 8 of 26
1125807001 Rev B
Advertisement
