Before You Begin - Steelcase Workplace Advisor Installation Instructions Manual

®

BEFORE YOU BEGIN

Prior to installation
- Confirm with customer IT contact that gateways are installed and online
- Have customer contact reserve work spaces for installation, approximately 2 minutes per sensor installation.
- Have customer contact confirm if you can screw into underside of worksurfaces.
Day of installation (on-site)
- Verify you have one package per space (sensors are pre-packaged per space and are pre-assigned to spaces in Workplace Advisor;
DO NOT unbox until on-site and in the assigned space)
- Walk through site with customer contact; verify location of gateways and review work area availability
What's included
- Sensor(s)
- Batteries: one (1) CR-123 installed in sensor
- Mounting adhesive strips pre-installed on mounting brackets
- Sensor mounting bracket(s)
- One alcohol wipe per sensor
1
2
3
4
Sensor
© 2017 Steelcase Inc. If you have a problem, question, or request,
Grand Rapids, MI 49501 contact Steelcase CX (TechCX@steelcase.com) or
U.S.A. 888.STEELCASE
for immediate action by people who want to help you.
Printed in U.S.A.
Steelcase Workplace Advisor - Worksurface Sensor Kit
Mounting bracket
Alcohol
Description
1. Sensor lens 3. Battery
2. LED indicator 4. Push button
(888.783.3522)
wipe
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
Installation Instructions
Install plans from
design team
3/16"
(5mm)
Device with
Internet access
and web browser
[optional, if using screws
from hardware package]
#2 Phillips bit
YBO
RA
Page 2 of 26
1125807001 Rev B