Audio Sources Dialog - AMX AXT-CA10 Instruction Manual

Audio Sources dialog

Use the options Audio Sources dialog (FIG. 5) to define the types of audio source devices (CD
players, tuners, MP3 players, etc.) to be used in this project. The number of audio sources available
for selection on this dialog is based on the number of Audio Sources specified in the System
Information dialog (with a maximum of 8 Audio Sources).
FIG. 5 Audio Sources dialog
The items in this dialog are described below:
Audio Sources dialog
Source Type:
Display Text:
Use Video:
Design XPress Programmer's Guide
Design XPress supports the following types of audio source devices:
• CD Changers
• CD/DVD players
• DSS Tuners
• MAX Content Servers (MAX-IMS and MAX-MMS)
• MP3 Players (Imerge SoundServer, Integra NAS-2.3-Net-Tune, Marantz DH9300 and
ReQuest ARQ2).
• Tuners
Select the type of audio source device from the list. This populates the Display Text field with a
generic description of the selected device. You can either use the default description, or edit it
in the Display Text field (see below).
Each Audio Source requires a descriptive name so it can be referenced on touch panels and
DMS keypads. These descriptive names are entered into the Display Text field.
Note: Display Text is limited to 8 characters and can only contain characters A-Z, a-z, 0-9, -
(dash), and _ (underscore).
Click to enable using the video output from this device in your project. This option determines
whether this device can be selected as a Video Source.
Using the Design XPress Project Wizard
25