Starting And Stopping; To Start Engine; To Stop Engine - Briggs & Stratton 90000/10000 Operating And Maintenance Instructions Manual

STARTING AND STOPPING

REWIND (MANUAL) STARTER

TO START ENGINE

When starting engine thereafter, push primer bulb firmly 3 times as illustrated below and pull starter rope as instructed below.
[1] Check oil level (see p. 8).
[2] Move throttle
(if equipped) to FAST.
[3] Firmly push primer
bulb 3 times.
Primer
bulb
[4] Close safety brake handle on lawn mowers
and any other equipment with this feature.

TO STOP ENGINE

CAUTION:
Do not stop engine by
moving choke control
to CHOKE. Backfire,
fire or engine damage
could occur.
[1] Move throttle (if equipped)
to SLOW, then
10
[5] Grasp rope handle. Pull slowly until resistance is
felt, then pull rapidly to start engine and avoid
kickback.
WARNING
[6] Let engine warm up.
Operate engine with
throttle in FAST.
[2] Release safety brake con-
trol handle.
• When starting engine,
pull cord slowly until
resistance is felt, then
pull rapidly.