Power Management Setup - American Megatrends Titan III User Manual

Power Management Setup

The AMIBIOS Setup options described in this section are selected by
choosing the Power Management Setup icon from the Setup section on the
AMIBIOS Setup main menu.
Power Management/APM Set this option to Enabled to enable power management features
and APM (Advanced Power Management). The settings are Enabled, Instant
On, or Disabled. The Optimal and Fail-Safe default settings are Disabled.
Instant-On Timeout (Minute) This option specifies the length of a period of system inactivity
while the computer is in Full power on state. When this length of time
expires, AMIBIOS takes the computer to a lower power consumption state,
but the computer can return to full power instantly when any system activity
occurs. This option is only available if supported by the computer hardware.
The settings are Disabled or 1 Min. through 15 Min in 1 minute intervals.
The Optimal and Fail-Safe default settings are Disabled.
Green PC Monitor Power State This option specifies the power state that the green PC-
compliant video monitor enters when AMIBIOS places it in a power saving
state after the specified period of display inactivity has expired. The settings
are Off, Standby, Suspend, or Disabled. The Optimal and Fail-Safe default
settings are Standby.
Video Power Down Mode This option specifies the power state that the video subsystem enters
when AMIBIOS places it in a power saving state after the specified period of
display inactivity has expired. The settings are Standby, Suspend, or
Disabled. The Optimal and Fail-Safe default settings are Standby.
Chapter 2 WINBIOS Setup 45
Cont'd