ADVANCED CMOS SETUP Options
Typematic Rate Programming
Typematic Rate Delay
Typematic Rate
Typematic Rate Programming enables or disables the following two options. Typematic Rate Delay (250,
500, 750, or 1,000 milliseconds) and Typematic Rate (6, 8, 10, 12, 14, 15, 20, 24, or 30 characters per
second) control the speed at which a keystroke is repeated.
When a key is pressed and held down, the associated character is displayed. After a delay specified by the
Typematic Rate Delay, the character repeats at the Typematic Rate. The defaults are:
Option
BIOS default
Power-On default
Typematic Rate Programming
Enabled
Disabled
Typematic Rate Delay
500
500
Typematic Rate
30
15
Mouse Support Option
When enabled, AMIBIOS supports a PS/2-type mouse. The settings are Enabled or Disabled. The BIOS
Setup and Power-On default is Disabled.
Above 1 MB Memory Test
This feature, when enabled, executes POST memory routines on the RAM above 1 MB (if present on the
system). If disabled, AMIBIOS only checks the first 1 MB of RAM. The BIOS Setup default is Enabled.
The Power-On default is Disabled.
Chapter 5 AMIBIOS Setup
68