Table of Contents
Advertisement
AMIFlash,
Continued
Enter the filename with which Flash EPROM will be reprogrammed (S87P.ROM). AMIFlash reads the file and displays a
startup message. A Press any key to continue. After Flash programming starts, programming activity is indicated by a
rotating / character. AMIFlash informs you when Flash programming is successful (as shown below). Press any key
to reboot the system.
Appendix D Flash EPROM Support
114
Errors During Flash Programming
If an error occurs during programming, an error
messages is displayed and the system halts. Turn
power off and replace the Flash EPROM with a
new programmed Flash EPROM to make the
system usable.
Advertisement
Table of Contents
