Auto Configuration With BIOS Defaults
Auto Configuration With BIOS Defaults uses the default system settings for all AMIBIOS Setup options.
The BIOS defaults are best-case settings that optimize system performance. If CMOS RAM is corrupted,
the BIOS default settings are automatically loaded. Highlight this option, type Y, and press <Enter> to use
BIOS defaults. The following appears:
Default values loaded. Press any key to continue.
Auto Configuration With Power-On Defaults
This option configures the Power-On default settings for all AMIBIOS Setup options. These are not optimal
for system performance, but are the most stable settings. Use this option as a diagnostic aid if the system is
erratic. Highlight this option, type Y, and press <Enter> to use the Power-On defaults. The following
appears:
Default values loaded. Press any key to continue.
Change Password
The AMIBIOS password feature provides password control over the use of AMIBIOS Setup and the system
itself.
Enterprise-IV EISA VLB Motherboard User's Guide
61