Table of Contents
Advertisement
Chapter 3
Installation
Step 1 Unpack the Motherboard
Chapter 3 Installation
20
Step
1
Unpack the motherboard
2
Set switch and jumper options.
3
Install memory.
4
Install upgradable processor or math coprocessor.
5
Install motherboard.
6
Connect the power supply.
7
Connect the keyboard.
8
Connect the mouse.
9
Connect cables.
10
Install adapter cards
11
Perform initial test and configuration.
Step
1
If the box is damaged, call Technical Support at 404-246-
8600.
2
Perform all unpacking and installation procedures on a
grounded anti-static mat. Wear an anti-static wristband,
grounded at the same point as the anti-static mat or use a sheet
of conductive aluminum foil grounded through a 1 megohm
resistor.
3
The motherboard is packed in an anti-static bag, and
sandwiched between sheets of sponge. Remove the sponge and
the anti-static bag. Save the original packing material.
4
Place the motherboard on a grounded anti-static surface
component-side up.
5
Inspect the motherboard for damage. Do not apply power if
damaged.
6
Press down on all socketed ICs to verify proper seating.
7
If the motherboard is undamaged, it is ready to be installed.
Action
Action
Turn to
Page 20
Page 22
Page 25
Page Error!
Bookmark not
defined.
Page 30
Page 32
Page 35
Page 35
Page 36
Page 41
Page 47
Advertisement
Table of Contents
