Korg Stage Vintage SV2-73 Quick Manual page 26

24| English
Setting the transposition interval
1 Keep the TRANSPOSE button pressed for about one second, until its LED
starts blinking.
2 Press the note corresponding to the desired transposition. Transposition will
be activated, and the LED will stay on.
Key
C3 – B3
C4 (Middle C)
C#4 – C5
If no note is played after some seconds, the transpose programming will end.
3 Press the TRANSPOSE button again to turn transposition off. The LED will
turn off.
NOTE: When the instrument is turned off, transposing is reset.
-12 0
C3
Effect
12 – 1 semitones below
Standard pitch
1 – 12 semitones higher
+12
C5