American Megatrends Baby EISA User Manual page 74

Hard Disk Format Utility,
Answer the questions on the screen. The first two questions are already
completed if only one hard disk drive was selected in STANDARD CMOS
SETUP and the cursor is on Interleave. The Disk Drive Type is read from
CMOS RAM. The interleave factor can be selected manually or determined
by the Auto Interleave routine.
The hard disk drive manufacturer usually provides a list of bad tracks.
Enter these tracks. They are then labeled as bad to prevent data from
being stored on them. The following screen is displayed after entering Y
in Mark Bad Tracks, pressing <Enter>, and selecting add, delete, revise,
or clear from the Bad Track Edit Menu.
Type Y and press <Enter>. A warning screen appears. Press any key to continue.
68
Chapter 4 AMIBIOS Setup
Continued
Warning
Data on the hard disk drive will be irrevocably lost.