Section 5 Amibios Password Support - American Megatrends Baby EISA User Manual

Section 5
AMIBIOS Password Support
AMIBIOS Setup has an optional password feature. The system can be
configured so the end user must enter a password every time the system
boots or when Setup is run.
Changing a Password
The password check option is enabled or in ADVANCED CMOS SETUP (Page
56).
The password (1-6 characters) is stored in CMOS RAM. To change a
password, select the Change Password option from the AMIBIOS Setup Main
Menu and press <Enter>. The following prompt appears.
The first time this option is selected, the end user must enter a
password and press <Enter>. The screen does not display the characters
entered. After the current password is correctly entered, the end user
is asked to retype the new password and press <Enter>.
If the password confirmation is incorrect, an error message appears. If
the new password is entered without error, the end user can press <Esc>
to return to the AMIBIOS Setup Main Menu.
If You Do Not Want to Use a Password
Just press <Enter> when the password prompt appears.
American Megatrends 80486 Baby EISA Motherboard User's Guide
Enter CURRENT Password:
63