Table of Contents
Advertisement
Advanced Setup,
Continued
Above 1 MB Memory Test
When this option is enabled, the BIOS memory test is performed on all system memory. When this option is
disabled, the memory test is done only on the first 1 MB of system memory. The settings are Enabled or
Disabled.
Memory Test Tick Sound
This option enables (turns on) or disables (turns off) the ticking sound during the memory test. The settings
are Enabled or Disabled.
Memory Parity Error Checking
This option enables or disables parity error checking for system RAM. The settings are Enabled (all system
RAM parity is checked) or Disabled (parity is checked only on the first 1 MB of system RAM).
Hit <DEL> Message Display
Disabling this option prevents
Hit <DEL> if you want to run Setup
from appearing when the system boots. The settings are Enabled or Disabled.
Extended BIOS RAM Area
Specify in this option if the top 1 KB of the system programming area beginning at 639K or 0:300 in the
BIOS area in low memory will be used to store hard disk information. The settings are Top 1K or 0:300.
Chapter 6 WinBIOS Setup
18
Advertisement
Table of Contents
