Step 7 Connect Cables,
J8 Auxiliary Power Off
J8 is a two-pin berg that is connected to the power supply two-pin cable that can turn off power to the
auxiliary power output. J8 can be used to switch off power to the monitor after the timeout specified in Power
Management Setup expires. J8 Pin 2 is GND. Pin 1 is the signal to switch off power.
J1 Fan Connector
J1 is a two-pin berg that can be attached to an additional CPU cooling fan. Pin 2 is the anode. Pin 1 is the
cathode.
Atlas PCI Pentium EISA Motherboard User's Guide
Continued
39