Ricoh Pro C7200 Series Cip Training page 22

CIP Training Pro C7200 series
Image Position (registration)
Here you can select to either adjust the front side
only or both sides. In this example, we will select
both sides.
30 test pages will be printed. The last page that
is printed is the results page. This shows the results
of the procedure and the new values that will be
applied to the device.
Press "Apply" to save the settings.
If you are happy with the paper registration, you
can end the process here.
If the registration needs further adjusting, you have
two choices.
1. Manual Adjustment of the registration.
2. Enable Image Position Feedback Correction.
If you enable Image Position Feedback Correction , the test marks will be printed on the customer's job. They
will need to trim the job once printed.