Ricoh Pro C7200 Series Cip Training page 16

CIP Training Pro C7200 series
Paper Catalogue Media Identification Unit
7. Change the settings for custom paper (such as paper's name, size, and type), as
necessary.
8. Press [Save Paper].
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched], or [Textured] and press [Save Paper], a message appears to notify you that the
[Advanced Settings] will be initialized. To apply the changes for those settings, select
[Change]. To cancel the changes, select [Do not Change].
9. Press [Add New].
1. Select a number that is labeled as "Not Programmed".
• The custom paper overwrites the existing item if you select an existing custom paper.
1. Press [Save].
2. Press [Program].
3. Press [Exit].
4. Press .
5. Press the [Home] (
• When you register and scan custom paper using the Media Identification Unit, following items
are automatically specified:
• Paper weight
• Coated paper other than matte paper
Modifying the registered custom paper settings using the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Press [CustomPaper Management].
4. Select the custom paper whose settings you want to modify.
If the paper you want to select is not displayed, use [Jump to Row], or scroll through the
screen until the desired item is displayed.
5. Press .
6. Press [Scan the Value].
7. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
) icon at the center bottom of the screen.