Advertisement
Installation Manual
Product:
INSTALLATION MANUAL
Model:
PRODUCT: PX 3 ADAPTER
Suits Bumper:
MODEL:
PART NO: DT-2D18121
CAUTION!
CAUTION!
To reduce the risk of serious injury or damage, please read and understand all instructions and
To reduce the risk of serious injury or damage, please read and understand all
procedures before attempting to install or use this product.
Safety glasses must be worn at all times during installation or maintenance of this product.
instructions and procedures before attempting to install or use this product.
Ensure all mounting bolts are tensioned after 1000 kms and periodically there after.
Safety glasses should be worn at all times during installation or maintenance of this
product.
Ensure all mounting bolts are tensioned after 1,000kms and periodically there-after.
Information on this sheet is prepared as a customer aid, from reliable information, with the utmost care and should not be used for any other purpose.
Motospecs reserves the right to make product or publication changes at any time without notice. © Copyright Motospecs, all rights reserved.
FITTING INSTRUCTIONS
PXIII Radar Adapter (DT-2D18121)
Ford Ranger (2018-On)
DT-2D18081
FORD RANGER ( 2018- )
www.drivetech4x4.com.au
Australia
www.drivetech4x4.com.au
New Zealand
www.drivetech4x4.co.nz
Advertisement
Table of Contents
Related Manuals for Rival Drivetech 4x4 DT-2D18121
Summary of Contents for Rival Drivetech 4x4 DT-2D18121
- Page 1 Installation Manual PXIII Radar Adapter (DT-2D18121) Product: INSTALLATION MANUAL Ford Ranger (2018-On) Model: PRODUCT: PX 3 ADAPTER DT-2D18081 Suits Bumper: MODEL: FORD RANGER ( 2018- ) PART NO: DT-2D18121 CAUTION! CAUTION! To reduce the risk of serious injury or damage, please read and understand all instructions and To reduce the risk of serious injury or damage, please read and understand all procedures before attempting to install or use this product.
- Page 2 Weight: 760gm INSTALLATION NOTICE Compatibility: Drivetech 4x4 Bumper by Rival DT-2D18081B * The PX3 Adapter must be mounted and affixed to the vehicle according to this installation Installation Notice manual. * Personal safety during the installation process must be adhered to at all times and the use of personal safety equipment is highly recommended.
- Page 3 PARTS LISTING 1. Template........... 1 pc. Parts Listing 1 pc. 2. Decoration pad........3. Bracket №1........1 pc. 1 pc. 4. Bracket №2........1 pc. 5. License plate........1. Template 1 pc. 6. Bolt 8х20........... 1 pc. 2. Fascia Plate 1 pc.
- Page 4 Installation Procedure Инструкция по установке Инструкция по установке INSTALLATION PROCEDURE 1. Position template plate between upright supports on the centre of the Bumper 1. Install template (pos. 1), as shown. Mark the shape of cut out and prick 6 holes. 2.
- Page 5 Tighten all connectors after that. 11. Recheck all nuts and bolts to ensure that they are fastened tightly Before operating a vehicle fitted with RIVAL PX3 Adapter: Before operating a vehicle fitted with the PXIII Radar Adapter: - make sure all fittings are tightened •...
Need help?
Do you have a question about the Drivetech 4x4 DT-2D18121 and is the answer not in the manual?
Questions and answers