Troubleshooting Guide - Alpine i207-WRA Restyle Installation Manual

Set Up Guide
1
Turn the vehicle's Ignition switch to ACC.
2
Turn ON the i207-WRA by pressing any key.
3
Select the user language and press OK.
4
With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake
again.
5
If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT).
6
AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE. If this
feature is not desired turn it off in the AUDIO MENU (MENU/SETUP/SOUND/MUTE WHILE BACKING UP).
7
If the AUX Input is being use be sure to turn it ON in the SETUP MENU. (MENU/SETUP/SOURCE/AUX).
8
Set the DVD player (if optional DVD player is installed). (MENU/SETUP/SOURCE/HDMI).
9
When the KAC-001 (External Accessory Control Module) is present be sure to turn it ON in the SETUP MENU.
(MENU/SYSTEM/EXTERNAL ACCESSORIES/EXTERNAL ACCESSORY CTLR).
10
Vehicle information- Set the desired gauge information. (MENU/VEHICLE INFO/GAUGES/CAR SETTINGS).

Troubleshooting Guide

Symptom
1
iPhone not working with
HDMI.
2
Android phone is not working
with HDMI.
3
iDatalink website says serial
number is invalid.
4 No output from RCA's
Possible Cause
Not using Apple HDMI to Lightning
adapter.
Didn't plug USB power into a 2A
source.
Using incorrect HDMI adapter.
Miracast adapter isn't plugged into
a 2A source.
Miracast adapter has resolution
settings that are too high.
Incorrect serial number is being
used.
Serial number may not be in
iDatalink database.
Maestro module is flashed for
amplified system.
i207-WRA 20201016v1
Remedy
Purchase the HDMI to Lightning adapter
directly from Apple. Not all 3rd party
adapters work the same.
Do not plug into the USB from the Alpine
head unit. A third party USB adapter will
need to be used that is 2A.
If the phone has the feature to use an HDMI
adapter it must be the one purchased from
the manufacturer of the phone, not a third
party adapter.
Do not plug into the USB from the Alpine
head unit. A third party USB adapter will
need to be used that is 2A.
Plug the adapter into another monitor (for
example a television in the home) and reduce
the resolution settings.
In the i207-WRA settings confirm the serial
number. MENU/SETUP/GENERAL/ABOUT.
Call ADS at 1-866-427-2999 and verify.
Re-flash module for non-amplified system.
Jeep Wrangler
˜ 18/19