Configuring Device Management Settings On The Phone; Configuring Device Management Settings Through The Web Interface; Device Management Settings - Avaya B199 Installing And Administering

Note:
If the phone has DES enabled, provisioning starts automatically. In case of any failure after
the downgrade, the phone displays a DES provisioning error message. In this case, you can
disable DES in the phone settings and reboot.
Related links
Factory reset on page 125

Configuring Device Management settings on the phone

About this task
Use this procedure to configure the Device Management settings on the phone.
Procedure
1. Log in as the administrator.
2. On the phone screen, tap Settings > Device Management.
3. Choose the parameter that you want to configure and proceed to the options available.
4. After you made the choices, return to the home screen.
The phone reboots to apply the changes.
Configuring Device Management settings through the web
interface
About this task
Use this procedure to configure the Device Management settings through the web interface.
Procedure
1. Log in as the administrator.
2. On the web interface, click Provisioning.
3. Make the appropriate configurations.
4. Click Save.
The phone reboots to apply the changes.

Device Management settings

The following table lists the Device Management settings of Avaya Conference Phone B199
available through the web interface in the Provisioning tab in the Device Management section or
on the phone in Settings > Device Management.
February 2021 Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
Provisioning on Avaya Conference Phone B199
113