Bluetooth Connection - Avaya B199 Installing And Administering

When you release the button, it flashes red one time and then starts flashing green to
indicate that the upgrade process has started. The LEDs on the phone turn red to indicate
that it is busy with the microphone upgrade. The upgrade process takes about 7 minutes.
When the upgrade is completed, the microphone LEDs turn off.
2. Check the microphone version by doing one of the following:
• On the phone screen, tap Settings > Status.
• On the web interface, go to the Status tab.

Bluetooth connection

Avaya Conference Phone B199 can establish wireless communication over Bluetooth with devices
equipped with Bluetooth connectivity, such as mobile phones, tablets, or computers. With
Bluetooth, you can use the phone as a speakerphone for call handling, or as an audio receiver for
audio streaming.
The following table lists the Bluetooth technologies that B199 Conference Phone supports:
Bluetooth technology
Bluetooth LE
Bluetooth Classic
B199 Conference Phone has a modified Pulse-code modulation (PCM) bus installed. This
provides for a better audio transmission compared to the previous releases of the phone.
Note:
You cannot use Bluetooth LE and Bluetooth Classic connection simultaneously.
If you connect B199 Conference Phone to a Bluetooth device, you cannot connect it to a
mobile device with the Avaya
to the Bluetooth device.
If you connect B199 Conference Phone to a mobile device using the Avaya
Assistant application, you cannot connect it to another Bluetooth device until you end the
connection to Avaya
Switching between the Bluetooth modes
The default mode is Bluetooth LE. To switch to Bluetooth Classic, you must pair and connect B199
Conference Phone to a Bluetooth device. When you select the Bluetooth Classic mode, the phone
turns off Bluetooth LE. If there is no Bluetooth Classic connection, the phone switches back to
Bluetooth LE after a timeout.
February 2021
B199 icon Functionality
To connect to a mobile device with Avaya
Assistant application installed on it. For more information,
see Avaya Conference Assistant
This is the default mode.
To connect to Bluetooth devices, such as mobile phones,
tablets, and personal computers, for call handling or audio
streaming.
®
Conference Assistant application until you end the connection
®
Conference Assistant.
Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
Bluetooth connection
®
Conference
on page 80.
®
Conference
91