Operation - Makita XRM10 Instruction Manual

Job site charger radio
Hide thumbs Also See for XRM10:
Table of Contents

Advertisement

NOTE: It will take several seconds until the indicator
for battery status/capacity appears after the AC power
adaptor is plugged into the mains.
NOTE: If the AC power adaptor is disconnected from
the radio during battery charging, the radio turns off
for a few seconds and then automatically turns on
with the battery power supply.
Storing the AC power adaptor /
external device
Hook for the AC power adaptor
The hook on the back of the radio is useful for carrying
the AC power adaptor. When carrying, bundle the cords
and tie them with AC power adaptor using the band.
Fig.12
1. Hook 2. AC power adaptor 3. Band
Do not store AC power adaptor in the
NOTICE:
battery compartment. The cord may be pinched and
damaged when closing the battery cover.
Always hold the handle when carrying
NOTICE:
the radio.
Be careful not to drop the AC power
NOTICE:
adaptor hooked on the back of the radio.
Storing the external device
You can store your mobile device into the pocket inside
the battery cover. While storing the mobile device, you
can charge it by connecting to the USB power supply
port.
Fig.13
1. Pocket 2. Mobile device 3. Battery cover
Bottle cap opener
The bottle cap opener is provided on the back of the
radio.
1
2
3
Fig.14
1. Bottle cap opener
NOTICE:
bottle cap opener. Failure to do so may cause the
radio tipped over and result in damage or malfunction.
Be careful not to spill the beverage
NOTICE:
onto the radio when opening the cap.

OPERATION

Switching on/off the radio
Press the Power button
Press the Power button
radio.
Adjusting the volume level
Turn the Tuning control knob
the volume. Turn the Tuning control knob
clockwise to decrease the volume.
NOTE:
tuning and some settings.
12 ENGLISH
3
1
to switch on the radio.
again to switch off the
clockwise to increase
1
2
counter-

Advertisement

Table of Contents
loading

Table of Contents