Operation - Makita DMR110N Instruction Manual

automatically disconnected. The AC adaptor should be
disconnected from the main supply when not in use.

OPERATION

This radio has three tuning methods- Scan tuning,
Manual tuning and Memory presets recall.
Selecting a station – DAB
1. Press the Power button to switch on your radio.
2. Select the DAB mode by pressing the Band button.
3. Press the Advanced setting button and rotate the
Volume/Tuning Control/Select knob until "Station List"
is flashing on the screen. Press the Volume/Tuning
Control/Select knob to enter the list of the stations.
4. Rotate the Volume/Tuning Control/Select knob to
scroll through the list of available stations. Press the
knob to select the station.
5. Adjust the desired volume by rotating the Volume/
Tuning Control/Select knob.
Display modes – DAB
Your radio has a range of display options in the DAB
mode:
Press the Info button to cycle through the various
options shown in the following letters (a. to g.).
a. Station name
b. Program type
c. Multiplex name
d. Time & date
e. Frequency and
channel
f. Bit rate/Audio type
g. Signal strength
Finding new stations – DAB
From time to time, new DAB radio stations may become
available. Or you may have moved to a different part of
the country. In this case you may need to activate your
radio to scan for new stations.
Indicates the station name being
listened to.
Indicates the type of station
being listened to. E.g. Pop,
Classics, News, etc.
Indicates the name of the DAB
multiplex to which the current
station belongs.
Indicates the current time and
date.
Indicates the frequency and
channel number for the currently
tuned DAB station.
Indicates the digital audio bit
rate and audio type for the
currently tuned DAB station.
Indicates the signal strength for
the currently tuned DAB station.
To allow the radio to find the available stations, it is
recommended to carry out a full scan of the entire DAB
Band III frequencies.
1. Press the Auto tune button.
2. Your radio will perform a full scan of the DAB
frequencies. As new stations are found, the station
counter on the left side in the display will increase
and stations will be added to the list.
Manual tuning – DAB
Manual tuning allows you to tune your radio to a
particular DAB frequency in Band III. This function can
also be used to assist the positioning of the antenna
or the radio so as to optimize reception for a specific
channel or frequency.
1. Press the Advanced setting button and rotate the
Volume/Tuning Control/Select knob until "Manual
Tune" shown on the display. Press the Volume/Tuning
Control/Select knob to enter the manual tuning mode.
2. Rotate the Volume/Tuning Control/Select knob to
select the desired DAB channel. Press Volume/
Tuning Control/Select knob to confirm the chosen
frequency.
Station order setup – DAB
Your radio has 3 station order settings from which
you can choose. The station order settings are
alphanumeric, ensemble and valid station.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Station order" appearing on the display, then press
the Volume/Tuning Control/Select knob to enter the
setting.
3. Rotate the Volume/Tuning Control/Select knob to
select the following options and press the knob to
confirm the setting.
Alphanumeric
Ensemble
Valid
Dynamic Range Control (DRC) – DAB
DRC feature can make quieter sounds easier to hear
when your radio is used in a noisy environment by
reducing the dynamic range of the audio signal. There
are three levels of compression:
DRC 0
DRC 1/2
DRC 1
9 ENGLISH
Sorts the station list alpha-
numerically 0...9 A...Z.
Organizes the station list by DAB
multiplex.
Shows only those stations for which
a signal can be found.
No compression applied.
Medium compression applied.
Maximum compression applied.