Table of Contents
Advertisement
6. Start the programme - the end of a programme
Starting a programme
Touch the flashing Start/Stop sensor.
The door will lock ( will appear in the
display to show this) and the
programme will start.
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the
programme has started the programme
duration will appear in the time display.
Energy savings
After 10 minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
Touch the Start/Stop sensor (this
does not have any effect on a
programme that is running).
End of programme
The door is still locked during the Anti-
crease phase and the following will
appear alternately in the display:
Finish/Anti-crease
and
Press Stop button
Touch the Start/Stop sensor. The
door will unlock.
Pull open the door.
Remove the laundry.
32
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to
allow the drum to dry.
Turn the programme selector to the
position. This switches the
washing machine off.
If applicable, remove the used
capsule from the detergent
OK
dispensing drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
OK
Advertisement
Table of Contents
