Table of Contents
Advertisement
f Optical interface
This is used by the Service
department as a transmission point.
g Sensors for extra options
You can supplement wash
programmes with extra options.
If a wash programme has been
selected, the sensor controls for the
possible Extras light up dimly.
h sensor control
You can view information about the
energy and water consumption of
your washing machine with the
sensor.
See "Washing environmentally and
economically, Eco Feedback" for
more information.
The following information will appear
in the display:
– An estimate of the energy and
water consumption before the
programme begins.
– The actual energy and water
consumption and the cost during
the programme or at the end of
the programme.
i sensor
The sensor starts the delay start
function. With Delay start you can
delay the start of the programme.
The start of the programme can be
delayed from 15 minutes up to a
maximum of 24 hours. This allows
you to make use of night-time
economy electricity rates, for
example.
Please see "Delay start" for more
information.
Operating the washing machine
j Start/Stop sensor
Touching the Start/Stop sensor
starts the selected programme or
cancels a programme that has
already been started. The sensor
flashes slowly as soon as it is
possible for a programme to be
started and then lights up constantly
after the programme has started.
k sensor
This sensor is used for activating
Cap dispensing.
l Programme selector
This is used for selecting
programmes and for switching off.
The washing machine is switched on
when you select a programme, and
switched off by turning the
programme selector to the
position.
15
Advertisement
Table of Contents
