Table of Contents
Advertisement
Maximum rinse level
The water level in the rinses can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
The maximum rinse level is deactivated
as standard.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a
Cottons programme with a temperature
of 70 °C or higher is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
Suds cooling is deactivated as
standard.
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the programme will be
cancelled and a fault message will
appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the programme from being
cancelled.
Low water pressure is deactivated as
standard.
Anti-crease
The Anti-crease function reduces
creasing after the end of the
programme.
At the end of the programme, the drum
continues to turn at intervals for up to
30 min. The washing machine door can
be unlocked at any time by touching the
Start/Stop sensor and then opened.
Anti-crease is activated as standard.
Settings
87
Advertisement
Table of Contents
