Cameras - Camera Status - American Dynamics 48 Plus Installation And Operation Manual

2. Enter the number of the preset title (1-4096) that is to be displayed when the preset is called.
The text box at the top of the screen previews the preset title that will be displayed. Ensure this is correct before
selecting another field. Note that the alphanumeric title cannot be edited in this menu.
3. Repeat steps 1 and 2 for each preset that is to be given a title.
Note
In this screen it is possible to use the drag down method to change multiple fields in a column to the same setting. Enter
the required text or select the required option in the uppermost field and then click and drag the cursor over the fields
below that are to be set the same. Press the Enter key to copy the setting to the highlighted fields.

Cameras - Camera Status

The Camera Status screen displays real-time status information for each video input. To display this screen, expand
the Cameras node on the left-hand side of the display area and then click the Camera Status node.
Video inputs are listed by port reference (with the pseudo number also shown). This screen is read-only.
The screen displays the following information:
• Type indicates the type of telemetry the camera uses (i.e., RS422, Sensornet or _ _ _ for Manchester).
• Sync indicates whether a video synchronisation signal is detected on the video input.
• Software Version indicates the software version the camera is running (if available).
• Camera State indicates whether the video input is currently online or offline.
19
Installation and Operation Manual