Installing The Print Cartridge - Sharp UX-B30 Operation Manual

Installing the Print Cartridge

Installing the Print Cartridge
Follow these steps to install or replace the print cartridge.
When replacing the print cartridge, be sure to use a SHARP UX-C70B
♦
cartridge.
Print cartridge yield (at 4% coverage)
Initial cartridge
Quality mode OFF:
Quality mode ON
Replacement cartridge (SHARP UX-C70B)
Quality mode OFF:
Quality mode ON
Quality mode is initially turned off. To turn on Quality mode, see page 21.
Caution!
Do not open the print compartment cover or insert your hand in the machine
while it is printing.
Note: Keep print cartridges sealed in their packages until you are ready to
install them. It is recommended that you do not use a cartridge that has been
left unused for a long time after opening, as the print quality may be
considerably degraded.
♦
Make sure the machine's power cord is plugged in and paper is loaded
before installing or replacing the print cartridge.
♦
If a document is inserted in the feeder, remove the document before
installing or replacing the print cartridge (see page 39).
If PRINTER ERROR or PRINTER ERROR/CHECK PAPER appears...
In the event that the display shows either of the above messages, you must clear the
error before installing the print cartridge. The error can usually be cleared by pressing
, or if a paper jam has occurred, by removing the paper jam (see page 97).
16
Approx. 300 A4 pages
: Approx. 200 A4 pages
Approx. 600 A4 pages
: Approx. 400 A4 pages