Configure a G-2425G-B indoor ONT
Network configuration
Configuring WAN
Figure 7-14 WAN page
2
Configure the following parameters:
Table 7-11 WAN parameters
Field
WAN Connection List
Connection Type
IP mode
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
VLAN PRI
WAN IP Mode
Manual DNS
96
Description
Select a WAN connection from the list to set the connection parameters.
Select a connection type: IPoE or PPPoE.
Select an IP mode from the list: IPv4 or IPv6.
Select this checkbox to enable the WAN connection.
Select this checkbox to enable NAT.
Select the checkboxes to enable service types for this connection.
Select this checkbox to enable VLAN.
Enter the VLAN ID.
Enter the VLAN PRI.
Select an IP mode from the list.
Enter the manual Domain Name Server.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
August 2020
Issue 4