Configure a G-2425G-B indoor ONT
Security configuration
Configuring DMZ and ALG
Figure 7-33 DMZ and ALG page
2
Configure the following parameters:
Table 7-28 ALG parameters
Field
ALG Config
3
Click Save ALG.
4
Configure the following parameters:
Table 7-29 DMZ parameters
Field
WAN Connection List
Enable DMZ
DMZ IP Address
126
Description
Select the checkboxes to enable the protocols to be supported by the ALG: FTP, TFTP, SIP, H323,
RTSP, L2TP, IPSEC, PPTP.
Description
Select a WAN connection from the list.
Select this checkbox to enable DMZ on the selected WAN connection.
Select Custom Settings and enter the DMZ IP address or select the IP address of a connected
device from the list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
August 2020
Issue 4