Removing A Side Panel - LG LRGL5821S Service Manual

WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply going
to the range.
2. Remove the oven door from the range
(see page 3-16 for the procedure).
3. Pull the range away from the wall so you can
access the back of the unit.
4. Remove the rear panel (see page 3-2).
5. Raise the cooktop plate (see the page 3-4 for the
procedure).
6. Remove the two screws from the top rear of the
side panel.
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS

REMOVING A SIDE PANEL

3-17
7. Remove the 2 screws from the left or right side
panel.
8. Pull the back of the side panel out from the range
approximately 10˚.
9. Push forward and remove the side panel.