Removing A Side Panel - LG LRG4115ST Service Manual

WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the oven door from the range
(see page 3-15 for the procedure).
3. Pull the range away from the wall so you can
access the back of the unit.
4. Remove the back cover (see step 4 on 3-2 for
procedure)
5. Remove the manifold panel & cooktop plate. (see
page 3-5 for the procedure.)
6. Remove the 6 screws from the top of the side
panel.
COMPONENT ACCESS
REMOVING A SIDE P
REMOVING A SIDE P
ANEL
ANEL
7. Remove the screw from the left and right each
side panel.
8. Pull the back of the side panel out from the range
approximately 10˚.
9. Push forward and remove the side panel.
3-19