LG LRGL5821S Service Manual page 36

WARNING
• Turn off the electrical supply and
gas supply going to the range.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
4. CONVERTING THE SURFACE BURNERS
Remove the conversion kit (see illustration below).
LP orifice spuds have a orifice code on the top or
the side, denoting the location on the range where
it is to be installed.
Top burner orifices
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
CONVERSION TO LP GAS
Conversion
kit
Denotes
orifice
code
Broil and Bake
burner orifices
1) Remove grates, burner caps and burner heads.
2) Remove the brass orifice spud in the chimney
of each burner using a 13/32" or 10 mm nut
driver.
3) Install the LP orifice spuds into their correct
positions as described previously.
• LP (Propane) Gas Orifice Specifications
BURNER OUTPUT RATINGS: BTU/HR
LP(Propane) Gas. 10"W.C.P
MODEL
BTU RATE
LRGL5825** / LRGL5823** / LRGL5821**
BURNER
LF 12,000 / 10,000 / 10,000
LR
RR
RF 12,500 / 12,500 / 12,000
CTR
BROIL
BAKE
Denotes orifice code
108
Top burner orifices
• Natural Gas Orifice Specifications
BURNER OUTPUT RATINGS: BTU/HR
Natural Gas, 5"W.C.P
MODEL
BTU RATE
LRGL5825** / LRGL5823** / LRGL5821**
BURNER
LF 17,000 / 12,000 / 12,000
LR
RR
RF 20,000 / 20,000 / 17,000
CTR
BROIL
BAKE
Denotes orifice code
208
Top burner orifices
5-2
ORIFICE CODE
104 / 95 / 95
9,100 93
5,000 69
108 / 108 / 104
10,000 95
12,500 H
18,000 D
Broil and Bake burner orifices
ORIFICE CODE
190 / 155 / 155
9,100 134
5,000 102
208 / 208 / 190
10,000 142
13,500 P
19,000 A
K
Broil and Bake burner orifices