Oven Bottom, The Frame Guide And The Burner Assembly - LG LRGL5821S Service Manual

OVEN BOTTOM, THE FRAME GUIDE AND THE BURNER
1. Turn off the electrical supply and gas supply going
to the range.
2. Remove rear cover & motor cover (See step 3~4
on page 3-2)
3. Remove the igniter connector from the behind.
4. Remove the oven door and racks from inside of
the oven.
5. To remove the oven bottom:
- Remove the 2 screws and then remove oven
bottom.
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS
ASSEMBLY
2 screws
6. To remove the flame guide:
- Remove the 4 screws and then remove flame
guide.
7. To remove the bake burner assembly.
- Remove the 2 screws and then remove the
burner assembly.
8. To remove the igniter.
- Remove the 2 screws and then remove the
igniter.
3-9
4 screws
2 screws
2 screws