Check The Failure Code (F-Code) - LG LRGL5821S Service Manual

CHECK THE FAILURE CODE (F-code)

■ When the oven has some failure on cooking,
-. Cancel the cook.
-. In case of failure, F-code will not display.
-. It memorizes F-code logs in EEPROM.
■ Check the failure code as below steps.
1. press the "clear" key
2. press the "BAKE" and "BROIL" key at the same time for 1 second.
If the oven has some failure, the oven will show the failure code, like FIG.1
It shows the type of F-code and times of failure alternately for each two seconds.
Type of F-code
2 seconds
If the oven does not have any failure, the oven will display like FIG. 2
< FIG. 2 >
NOTE:
After checking the failure code, press the "CLEAR" key
Times of the occurred failure
2 seconds
< FIG. 1 >
8-1
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes