Fujitsu PRIMEHPC FX700 Upgrade And Maintenance Manual page 56

Chapter 4 Basic Software Procedures
4.4 Controlling Nodes
Input Item
00h
01h
02h
Force boot into EFI Boot Manager Stops at UEFI. (Default)
Auto select Boot Script Number
5. Click the [Apply] button at the bottom of the screen.
Display Item
Node#
Error Status
Running Status
Maintenance Status
Table 4.5 Specifying a Start Mode
Disk boot
Not supported
For OS installation
Automatically select DISK boot.
Table 4.6 Display Items on the [Power Control] Screen
Displays the node numbers (#00 to #07).
Displays the error status of nodes:
- EA: RouterEAlarm (Alarm)
- A: Alarm (Alarm)
- R: ReservedAlarm (Alarm)
- RR-U: ResetRequest-U (Alarm)
- RR-C: ResetRequest-C (Warning)
- W: Warning (Warning)
- -: Normal (Normal)
- Not-Present: CMU not mounted
- Unknown: Failed to retrieve status
Displays the operating status of nodes:
- Stop
- Reset
- POST
- UEFI Shell
- OS Booting
- OS Running
- OS Panic
- OS Shutdown
- Unknown (Failed to retrieve status)
- - (CMU not mounted)
Displays the maintenance status of nodes:
- On: Mode of maintenance in progress (Warm Maintenance)
- -: Other
- Unknown: Failed to retrieve status
Description
Description
35 C120-0090-04EN