Chapter 4 Basic Software Procedures
4.2 Updating HCP Firmware
3.
Click the [Browse] button, and select the HCP firmware to be registered.
4.
Click the [Register] button.
A dialog box appears and displays a message about overwriting the already registered HCP firmware.
5.
Click the [OK] button.
[Registered] in [HCP Version] displays the version number of the registered HCP firmware.
Remarks
-
HCP firmware registration takes about 5 minutes to complete.
-
If the HCP firmware registration fails, try again to register it.
Figure 4.3 [Firmware Update] Screen
Figure 4.4 Confirmation Dialog Box
26
C120-0090-04EN